汽配人首頁 > 問答首頁

MINI型拔動開關系列主要技術參數有哪些？

: 問 提問者：網友 | 2017-05-02

最佳回答

CONTACTRESISTANCE接觸電阻 1000HzMEASURED AT SMALL CURRENT（100 mA OR LESS）　在微小電流（100mA）以下測試 30mΩ MAX30毫歐以下INSULATIONRESISTANCE絕緣電阻 APPLY A VOLTAGE OF 500V DC SHALL BE APPLIED FOR 1 MIN AFTER WHICH MEASUREMENT BE MADE（1）BETWEEN TERMINALS（2）BETWEEN INDIVIDUAL TERMINALS AND FRAME 輸入500V DC 電壓1分鐘，按以下接觸方法測試：（1）排腳相互之間。（2）排腳與外殼之間。（2） 100MΩ MIN100兆歐以上DIELECTRICSTRENGTH耐電壓 AC 500V （50-60HZ）FOR 1 MIN TRIP CURRENT：0.5mA（1）BETWEEN TERMINALS（2）BETWEEN INDIVIDUAL TERMINALS AND FRAME 輸入AC 500V（50-60Hz）電壓，1分鐘感應電流爲0.5mA，按以下接觸方法測試：（1）排腳相互之間。（2）排腳與外殼之間。 WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC沒有絕緣破壞等異常5．MECHANICAL CHARACTERISTICS （機械性能規格）ITEM 項目 TEST CONDITIONS 測試條件 PERFORMANCE 規格OPERATING FORCE動作力 MEASUREMENT SHALL BE MADE AT THE NEAREST POINT OF THE COMPONENT OR AT THE POINT 3MM FROM THE TIP OF THE ACTUATOR （KNOB）在距離膠柄前端3mm作測定點。 250gf±100gfTERMINAL STRENGTH端子強度 A STATIC LOAD OF 300gf SHALL BE APPLIED TO THE TERMINAL FOR 15 SEC 。IN ANY DIRECION在排腳前端任意一個方向加300gf力度測試，時間爲15秒。 ELECTRICAL CHARACTERISCS SHALL BE SATISFIED WITHOUTDAMAGE OR EXCESSIVE LOOSENESS OF TERMINALS 在排腳中沒有裂開，鬆動等異常，滿足於機械，電器性能。: 回答者：網友

產品精選

我來回答